Incorporates Anybus CompactCom (HMS Industrial Networks).
Realizes both an extremely fast response speed and stable weighing in high vibration environments.
Enhances the performance of weighing devices that structurally have a source of vibration.
Wide zero and span adjustment ranges.
- Various types of field network (fieldbus) modules can be installed
- High-performance digital filtering that eliminates the effects of strong vibration
- High-speed (100 times/sec.), highly-accurate performance
- Compact, lightweight body makes it ideal for mounting into a control panel
- Dust and water-proof display (when mounted into a panel)
- Highly tolerant against electromagnetic noise
- Minimum input sensitivity
0.15µV/d
Zero adjustment range
-35mV to +35mV (-7mV/V to +7mV/V)
Load cell excitation
DC5V±5%, 120mA
Equipped with remote sensing
Up to 8 load cells(350Ω) can be connected.
Temperature coefficient
Zero; ±0.02µV/ °C(Typ.)
±0.1µV/ °C(Max.)
Span; ±3ppm/ °C(Typ.)
±15ppm/ °C(Max.)
Non-linearity
0.005% of F.S.
Maximum input noise
0.3µVp-p
Maximum measurement voltage
-35mV to +35mV (-7mV/V to +7mV/V)
Minimum input impedance
10MΩ
A/D conversion method
Delta Sigma
A/D resolution
Approx.16,000,000 counts
Maximum display resolution
999,999d (Less than 20,000d recommended)
A/D conversion rate
100 times/sec.
Calibration
Actual load calibration or digital span calibration without actual load
- Digital Unit
Display element
Measurement data display: 7-segment 6-digit green LED with 14.6mm high characters
Polarity display: Green LED (1)
Status display: Red LEDs (6)
Measurement data display unit
Switch to net weight value (NET) or gross weight value (GROSS).
Display range:0 to 999,999d (Select division from 1, 2, 5, 10, or 50)
Units:Affix a "g","kg",or"t"unit sticker
Status display
ZERO, STABLE, GROSS, NET, HOLD,and___(selected function in operation)
Standard serial output
20mA current loop signal (exclusive output for A&D peripheral devices)
Power
AC100 to 240V (+10%-15%) (50/60Hz)
Power consumption
Approx.10VA
Operating temperature and humidity
-10°C to 40°C/85%RH or less(no condensation)
Physical dimensions
144(W) x 72(H) x 135(D) mm (including protruding parts)
Panel cutout size
138 x 68 mm
Dust and water-proof
The IP65 display is dust and water-proof when mounted into a panel (When the provided rubber packing is affixed)
Weight
Approx. 800g
Instruction manual, rubber packing, terminal strip cover, capacity plate and unit stickers
- Optional items (The below items must be purchased locally.)
External input and output
Manufacturer : HMS Industrial Networks ( http://www.anybus.com/ )
Anybus® CompactCom
・Profibus Plug-In Module
・Modbus-RTU Plug-In Module
・DeviceNet Plug-In Module
